Statistics Information Functions

Statistics information functions are divided into the following two categories: functions that access databases, using the OID of each table or index in a database to mark the database for which statistics are generated; functions that access servers, identified by the server process ID, whose value ranges from 1 to the number of currently active servers.

pg_stat_get_db_conflict_tablespace(oid)
Description: Specifies the number of queries canceled due to a conflict between the restored tablespace and the deleted tablespace in the database.
Return type: bigint
pg_control_group_config
Description: Prints Cgroup configurations on the current node.
Return type: record
pg_stat_get_db_stat_reset_time(oid)
Description: Specifies the most recent time when database statistics were reset. It is initialized to the system time during the first connection to each database. The reset time is updated when you call pg_stat_reset on the database and execute pg_stat_reset_single_table_counters against any table or index in it.
Return type: timestamptz
pg_stat_get_function_total_time(oid)
Description: Specifies the total wall clock time spent in the function, in microseconds. The time spent on this function calling other functions is included.
Return type: bigint
pg_stat_get_xact_tuples_returned(oid)
Description: Specifies the number of rows read through sequential scans when the parameter is a table in the current transaction or the number of index entries returned when the parameter is an index.
Return type: bigint
pg_lock_status()
Description: Queries information about locks held by open transactions. All users can execute this function.
Return type: For details, see PG_LOCKS which is obtained by querying this function.
pg_stat_get_xact_numscans(oid)
Description: Specifies the number of sequential scans performed when the parameter is a table in the current transaction or the number of index scans performed when the parameter is an index.
Return type: bigint
pg_stat_get_xact_blocks_fetched(oid)
Description: Specifies the number of disk block fetch requests for a table or an index in the current transaction.
Return type: bigint
pg_stat_get_xact_blocks_hit(oid)
Description: Specifies the number of disk block fetch requests for tables or indexes found in cache in the current transaction.
Return type: bigint
pg_stat_get_xact_function_calls(oid)
Description: Specifies the number of times the function is called in the current transaction.
Return type: bigint
pg_stat_get_xact_function_self_time(oid)
Description: Specifies the time spent on this function in the current transaction, excluding the time spent on this function internally calling other functions.
Return type: bigint
pg_stat_get_xact_function_total_time(oid)
Description: Specifies the total wall clock time (in microseconds) spent on the function in the current transaction, including the time spent on this function internally calling other functions.
Return type: bigint

pg_stat_get_wal_senders()

Description: Queries walsender information on the primary server.

Return type: setofrecord

The following table describes return columns.

Table 1 Return column description

Column	Type	Description
pid	bigint	Thread ID of the WAL sender
sender_pid	integer	Lightweight thread ID of the WAL sender
local_role	text	Type of the primary node
peer_role	text	Type of the standby node
peer_state	text	Status of the standby node
state	text	Status of the WAL sender
catchup_start	timestamp with time zone	Startup time of a catchup task
catchup_end	timestamp with time zone	End time of a catchup task
sender_sent_location	text	Sending position of the primary node
sender_write_location	text	Writing position of the primary node
sender_flush_location	text	Flushing position of the primary node
sender_replay_location	text	Redo position of the primary node
receiver_received_location	text	Receiving position of the standby node
receiver_write_location	text	Writing position of the standby node
receiver_flush_location	text	Flushing position of the standby node
receiver_replay_location	text	Redo position of the standby node
sync_percent	text	Synchronization percentage
sync_state	text	Synchronization status
sync_group	text	Group to which the synchronous replication belongs
sync_priority	text	Priority of synchronous replication
sync_most_available	text	Maximum availability mode
channel	text	Channel information of the WAL sender

get_paxos_replication_info()

Description: Queries the primary/standby replication status in Paxos mode.

Return type: setofrecord

The following table describes return columns.

Table 2 Return column description

Column	Type	Description
paxos_write_location	text	Location of the Xlog that has been written to the Distribute Consensus Framework (DCF)
paxos_commit_location	text	Location of the Xlog agreed in the DCF
local_write_location	text	Writing position of a node
local_flush_location	text	Flushing position of a node
local_replay_location	text	Redo position of a node
dcf_replication_info	text	DCF module information of a node

pg_stat_get_stream_replications()
Description: Queries the primary/standby replication status.
Return type: setofrecord
The following table describes return values.
Table 3 Return value description
Return Parameter
Type
Description
local_role
text
Local role
static_connections
integer
Connection statistics
db_state
text
Database status
detail_information
text
Detailed information
pg_stat_get_db_numbackends(oid)
Description: Specifies the number of active server processes for a database.
Return type: integer
pg_stat_get_db_xact_commit(oid)
Description: Specifies the number of transactions committed in a database.
Return type: bigint
pg_stat_get_db_xact_rollback(oid)
Description: Specifies the number of transactions rolled back in a database.
Return type: bigint
pg_stat_get_db_blocks_fetched(oid)
Description: Specifies the number of disk blocks fetch requests for a database.
Return type: bigint
pg_stat_get_db_blocks_hit(oid)
Description: Specifies the number of disk block fetch requests found in cache for a database.
Return type: bigint
pg_stat_get_db_tuples_returned(oid)
Description: Specifies the number of tuples returned for a database.
Return type: bigint
pg_stat_get_db_tuples_fetched(oid)
Description: Specifies the number of tuples fetched for a database.
Return type: bigint
pg_stat_get_db_tuples_inserted(oid)
Description: Specifies the number of tuples inserted in a database.
Return type: bigint
pg_stat_get_db_tuples_updated(oid)
Description: Specifies the number of tuples updated in a database.
Return type: bigint
pg_stat_get_db_tuples_deleted(oid)
Description: Specifies the number of tuples deleted in a database.
Return type: bigint
pg_stat_get_db_conflict_lock(oid)
Description: Specifies the number of lock conflicts in a database.
Return type: bigint
pg_stat_get_db_deadlocks(oid)
Description: Specifies the number of deadlocks in a database.
Return type: bigint
pg_stat_get_numscans(oid)
Description: Specifies the number of sequential row scans done if parameters are in a table or the number of index scans done if parameters are in an index.
Return type: bigint
pg_stat_get_role_name(oid)
Description: Obtains the username based on the user OID. Only users with the sysadmin or monitor admin permission can access the information.
Return type: text
Example:
```
openGauss=# select pg_stat_get_role_name(10);
 pg_stat_get_role_name
-----------------------
 aabbcc
(1 row)
```
pg_stat_get_tuples_returned(oid)
Description: Specifies the number of sequential row scans done if parameters are in a table or the number of index scans done if parameters are in an index.
Return type: bigint
pg_stat_get_tuples_fetched(oid)
Description: Specifies the number of table rows fetched by bitmap scans if parameters are in a table or the number of table rows fetched by simple index scans using the index if parameters are in an index.
Return type: bigint
pg_stat_get_tuples_inserted(oid)
Description: Specifies the number of rows inserted into a table.
Return type: bigint
pg_stat_get_tuples_updated(oid)
Description: Specifies the number of rows updated in a table.
Return type: bigint
pg_stat_get_tuples_deleted(oid)
Description: Specifies the number of rows deleted from a table.
Return type: bigint
pg_stat_get_tuples_changed(oid)
Description: Specifies the total number of inserted, updated, and deleted rows after a table was last analyzed or autoanalyzed.
Return type: bigint
pg_stat_get_tuples_hot_updated(oid)
Description: Specifies the number of rows hot updated in a table.
Return type: bigint
pg_stat_get_live_tuples(oid)
Description: Specifies the number of live rows in a table.
Return type: bigint
pg_stat_get_dead_tuples(oid)
Description: Specifies the number of dead rows in a table.
Return type: bigint
pg_stat_get_blocks_fetched(oid)
Description: Specifies the number of disk block fetch requests for a table or an index.
Return type: bigint
pg_stat_get_blocks_hit(oid)
Description: Specifies the number of disk block requests found in cache for a table or an index.
Return type: bigint
pg_stat_get_partition_tuples_inserted(oid)
Description: Specifies the number of rows in the corresponding table partition.
Return type: bigint
pg_stat_get_partition_tuples_updated(oid)
Description: Specifies the number of rows that have been updated in the corresponding table partition.
Return type: bigint
pg_stat_get_partition_tuples_deleted(oid)
Description: Specifies the number of rows deleted from the corresponding table partition.
Return type: bigint
pg_stat_get_partition_tuples_changed(oid)
Description: Specifies the total number of inserted, updated, and deleted rows after a table partition was last analyzed or autoanalyzed.
Return type: bigint
pg_stat_get_partition_live_tuples(oid)
Description: Specifies the number of live rows in a partitioned table.
Return type: bigint
pg_stat_get_partition_dead_tuples(oid)
Description: Specifies the number of dead rows in a partitioned table.
Return type: bigint
pg_stat_get_xact_tuples_fetched(oid)
Description: Specifies the number of tuple rows scanned in a transaction.
Return type: bigint
pg_stat_get_xact_tuples_inserted(oid)
Description: Specifies the number of tuple inserted into the active subtransactions related to a table.
Return type: bigint
pg_stat_get_xact_tuples_deleted(oid)
Description: Specifies the number of deleted tuples in the active subtransactions related to a table.
Return type: bigint
pg_stat_get_xact_tuples_hot_updated(oid)
Description: Specifies the number of hot updated tuples in the active subtransactions related to a table.
Return type: bigint
pg_stat_get_xact_tuples_updated(oid)
Description: Specifies the number of updated tuples in the active subtransactions related to a table.
Return type: bigint
pg_stat_get_xact_partition_tuples_inserted(oid)
Description: Specifies the number of inserted tuples in the active subtransactions related to a table partition.
Return type: bigint
pg_stat_get_xact_partition_tuples_deleted(oid)
Description: Specifies the number of deleted tuples in the active subtransactions related to a table partition.
Return type: bigint
pg_stat_get_xact_partition_tuples_hot_updated(oid)
Description: Specifies the number of hot updated tuples in the active subtransactions related to a table partition.
Return type: bigint
pg_stat_get_xact_partition_tuples_updated(oid)
Description: Specifies the number of updated tuples in the active subtransactions related to a table partition.
Return type: bigint
pg_stat_get_last_vacuum_time(oid)
Description: Specifies the most recent time when the autovacuum thread is manually started to clear a table.
Return type: timestamptz
pg_stat_get_last_autovacuum_time(oid)
Description: Specifies the time of the last vacuum initiated by the autovacuum daemon on a table.
Return type: timestamptz
pg_stat_get_vacuum_count(oid)
Description: Specifies the number of times a table is manually cleared.
Return type: bigint
pg_stat_get_autovacuum_count(oid)
Description: Specifies the number of times the autovacuum daemon is started to clear a table.
Return type: bigint
pg_stat_get_last_analyze_time(oid)
Description: Specifies the last time when a table starts to be analyzed manually or by the autovacuum thread.
Return type: timestamptz
pg_stat_get_last_autoanalyze_time(oid)
Description: Specifies the time when the last analysis initiated by the autovacuum daemon on a table.
Return type: timestamptz
pg_stat_get_analyze_count(oid)
Description: Specifies the number of times a table is manually analyzed.
Return type: bigint
pg_stat_get_autoanalyze_count(oid)
Description: Specifies the number of times the autovacuum daemon analyzes a table.
Return type: bigint

Return Parameter	Type	Description
local_role	text	Local role
static_connections	integer	Connection statistics
db_state	text	Database status
detail_information	text	Detailed information

pg_total_autovac_tuples(bool,bool)

Description: Returns tuple records related to the total autovac, such as nodename, nspname, relname, and tuple IUDs. The input parameters specify whether to query relation and local information, respectively.

Return type: setofrecord

The following table describes return parameters.

Table 4 Return parameter description

Return Parameter	Type	Description
nodename	name	Node name
nspname	name	Name of a namespace
relname	name	Name of an object, such as a table, an index, or a view
partname	name	Partition name
n_dead_tuples	bigint	Number of dead rows in a table partition
n_live_tuples	bigint	Number of live rows in a table partition
changes_since_analyze	bigint	Number of changes generated by ANALYZE

pg_autovac_status(oid)

Description: Returns autovac information, such as nodename, nspname, relname, analyze, vacuum, thresholds of analyze and vacuum, and the number of analyzed or vacuumed tuples. Only users with the sysadmin permission can use this function.

Return type: setofrecord

The following table describes return parameters.

Table 5 Return parameter description

Return Parameter	Type	Description
nspname	text	Name of a namespace
relname	text	Name of an object, such as a table, an index, or a view
nodename	text	Node name
doanalyze	Boolean	Whether to execute ANALYZE
anltuples	bigint	Number of ANALYZE tuples
anlthresh	bigint	ANALYZE threshold
dovacuum	Boolean	Whether to execute VACUUM
vactuples	bigint	Number of VACUUM tuples
vacthresh	bigint	VACUUM threshold

pg_autovac_timeout(oid)
Description: Returns the number of consecutive timeouts during the autovac operation on a table. If the table information is invalid or the node information is abnormal, NULL will be returned.
Return type: bigint
pg_stat_get_last_data_changed_time(oid)
Description: Returns the time when INSERT, UPDATE, DELETE, or EXCHANGE/TRUNCATE/DROP PARTITION was last performed on a table. The data in the last_data_changed column of the PG_STAT_ALL_TABLES view is calculated by using this function. The performance of obtaining the last modification time by using the view is poor when the table has a large amount of data. In this case, you are advised to use the function.
Return type: timestamptz
pg_stat_set_last_data_changed_time(oid)
Description: Manually changes the time when INSERT, UPDATE, DELETE, or EXCHANGE/TRUNCATE/DROP PARTITION was last performed.
Return type: void
pg_backend_pid()
Description: Specifies the thread ID of the server thread attached to the current session.
Return type: integer

pg_stat_get_activity(integer)

Description: Returns a record about the backend with the specified PID. A record for each active backend in the system is returned if NULL is specified. The returned result does not contain the connection_info column. The initial user, system administrators and users with the monadmin permission can view all data. Common users can only query their own results.

Example:

openGauss=# select * from pg_stat_get_activity(139881386280704);
 datid |       pid       | sessionid | usesysid | application_name | state  |                        query                         | waiting |          xact_start           |          query_start          |
    backend_start         |         state_change         | client_addr | client_hostname | client_port | enqueue |     query_id      |   srespool   | global_sessionid | unique_sql_id | trace_id
-------+-----------------+-----------+----------+------------------+--------+------------------------------------------------------+---------+-------------------------------+-------------------------------+-----
--------------------------+------------------------------+-------------+-----------------+-------------+---------+-------------------+--------------+------------------+---------------+----------
 16545 | 139881386280704 |        69 |       10 | gsql             | active | select * from pg_stat_get_activity(139881386280704); | f       | 2022-01-18 19:43:05.167718+08 | 2022-01-18 19:43:05.167718+08 | 2022
-01-18 19:42:33.513507+08 | 2022-01-18 19:43:05.16773+08 |             |                 |          -1 |         | 72620543991624410 | default_pool | 1938253334#69#0  |    3751941862 |
(1 row)

Return type: setofrecord

The following table describes return parameters.

Table 6 Return parameter description

Return Parameter	Type	Description
datid	oid	OID of the database that the user session connects to in the backend
pid	bigint	Backend thread ID
sessionid	bigint	Session ID
usesysid	oid	OID of the user logged in to the backend
application_name	text	Name of the application connected to the backend
state	text	Overall status of the backend
query	text	Latest query at the backend. If state is active, this column shows the ongoing query. In all other states, it shows the last query that was executed.
waiting	Boolean	Whether the backend is currently waiting on a lock. If yes, the value is true.
xact_start	timestamp with time zone	Time when current transaction was started (null if no transaction is active). If the current query is the first of its transaction, the value of this column is the same as that of the query_start column.
query_start	timestamp with time zone	Time when the currently active query was started, or time when the last query was started if state is not active
backend_start	timestamp with time zone	Time when this process was started, that is, when the client connected to the server
state_change	timestamp with time zone	Time when state was last modified
client_addr	inet	IP address of the client connected to the backend. If this column is NULL, it indicates either the client is connected via a Unix socket on the server or this is an internal process, such as AUTOVACUUM.
client_hostname	text	Host name of the connected client, as reported by a reverse DNS lookup of client_addr. This column will be non-null only for IP connections and only when log_hostname is enabled.
client_port	integer	TCP port number that the client uses for communication with this backend (–1 if a Unix socket is used)
enqueue	text	Unsupported currently
query_id	bigint	ID of a query
srespool	name	Name of the resource pool
global_sessionid	text	Global session ID
unique_sql_id	bigint	Unique SQL statement ID
trace_id	text	Driver-specific trace ID, which is associated with an application request

pg_stat_get_activity_with_conninfo(integer)

Description: Returns a record about the backend with the specified PID. A record for each active backend in the system is returned if NULL is specified. The initial user, system administrators and users with the monadmin permission can view all data. Common users can only query their own results.

Return type: setofrecord

The following table describes return values.

Table 7 Return value description

Return Value	Return Type	Description
datid	oid	OID of the database that the user session connects to in the backend
pid	bigint	Backend thread ID
sessionid	bigint	Session ID
usesysid	oid	OID of the user logged in to the backend
application_name	text	Name of the application connected to the backend
state	text	Overall status of the backend
query	text	Latest query at the backend. If state is active, this column shows the ongoing query. In all other states, it shows the last query that was executed.
waiting	Boolean	Whether the backend is currently waiting on a lock. If yes, the value is true.
xact_start	timestamp with time zone	Time when current transaction was started (null if no transaction is active). If the current query is the first of its transaction, the value of this column is the same as that of the query_start column.
query_start	timestamp with time zone	Time when the currently active query was started, or time when the last query was started if state is not active
backend_start	timestamp with time zone	Time when this process was started, that is, when the client connected to the server
state_change	timestamp with time zone	Time when state was last modified
client_addr	inet	IP address of the client connected to the backend If this column is NULL, it indicates either the client is connected via a Unix socket on the server or this is an internal process, such as AUTOVACUUM.
client_hostname	text	Host name of the connected client, as reported by a reverse DNS lookup of client_addr. This column will be non-null only for IP connections and only when log_hostname is enabled.
client_port	integer	TCP port number that the client uses for communication with this backend (–1 if a Unix socket is used)
enqueue	text	Unsupported currently
query_id	bigint	ID of a query
connection_info	text	A string in JSON format recording the driver type, driver version, driver deployment path, and process owner of the connected database
srespool	name	Name of the resource pool
global_sessionid	text	Global session ID
unique_sql_id	bigint	Unique SQL statement ID
trace_id	text	Driver-specific trace ID, which is associated with an application request

pg_user_iostat(text)

Description: Displays the I/O load management information about the job currently executed by the user.

Return type: record

The following table describes return fields.

Name	Type	Description
userid	oid	User ID
min_curr_iops	int4	Minimum I/O of the current user across database nodes. The IOPS is counted by ones for column storage and by ten thousands for row storage.
max_curr_iops	int4	Maximum I/O of the current user across database nodes. The IOPS is counted by ones for column storage and by ten thousands for row storage.
min_peak_iops	int4	Minimum peak I/O of the current user across database nodes. The IOPS is counted by ones for column storage and by ten thousands for row storage.
max_peak_iops	int4	Maximum peak I/O of the current user across database nodes. The IOPS is counted by ones for column storage and by ten thousands for row storage.
io_limits	int4	io_limits set for the resource pool specified by the user. The IOPS is counted by ones for column storage and by ten thousands for row storage.
io_priority	text	io_priority set for the user. The IOPS is counted by ones for column storage and by ten thousands for row storage.
curr_io_limits	int4	Real-time io_limits value when io_priority is used to control I/Os

pg_stat_get_function_calls(oid)
Description: Specifies the number of times the function has been called.
Return type: bigint
pg_stat_get_function_self_time(oid)
Description: Specifies the time spent in only this function. The time spent on this function calling other functions is excluded.
Return type: bigint
pg_stat_get_backend_idset()
Description: Sets the number of currently active server processes (from 1 to the number of active server processes).
Return type: setofinteger
pg_stat_get_backend_pid(integer)
Description: Specifies the ID of the given server thread.
Return type: bigint
pg_stat_get_backend_dbid(integer)
Description: Specifies the ID of the database connected to the given server process.
Return type: oid
pg_stat_get_backend_userid(integer)
Description: Specifies the user ID of the given server process.
Return type: oid
pg_stat_get_backend_activity(integer)
Description: Active command of the given server process, but only if the current user is a system administrator or the same user as that of the session being queried and track_activities is on
Return type: text
pg_stat_get_backend_waiting(integer)
Description: True if the given server process is waiting for a lock, but only if the current user is a system administrator or the same user as that of the session being queried and track_activities is on
Return type: Boolean
pg_stat_get_backend_activity_start(integer)
Description: Specifies the time when the given server process's currently executing query is started only if the current user is the system administrator or the user of the session being queried and track_activities is enabled.
Return type: timestamp with time zone
pg_stat_get_backend_xact_start(integer)
Description: Specifies the time when the given server process's currently executing transaction is started only if the current user is the system administrator or the user of the session being queried and track_activities is enabled.
Return type: timestamp with time zone
pg_stat_get_backend_start(integer)
Description: Specifies the time when the given server process is started. If the current user is neither the system administrator nor the user of the session being queried, NULL is returned.
Return type: timestamp with time zone
pg_stat_get_backend_client_addr(integer)
Description: Specifies the IP address of the client connected to the given server process. If the connection is over a Unix domain socket, or if the current user is neither a system administrator nor the same user as that of the session being queried, NULL will be returned.
Return type: inet
pg_stat_get_backend_client_port(integer)
Description: Specifies the TCP port number of the client connected to the given server process. If the connection is over a Unix domain socket, -1 will be returned. If the current user is neither a system administrator nor the same user as that of the session being queried, NULL will be returned.
Return type: integer
pg_stat_get_bgwriter_timed_checkpoints()
Description: Specifies the time when the background writer starts scheduled checkpoints (because the checkpoint_timeout time has expired).
Return type: bigint
pg_stat_get_bgwriter_requested_checkpoints()
Description: Specifies the time when the background writer starts checkpoints based on requests from the backend because checkpoint_segments has been exceeded or the CHECKPOINT command has been executed.
Return type: bigint
pg_stat_get_bgwriter_buf_written_checkpoints()
Description: Specifies the number of buffers written by the background writer during checkpoints.
Return type: bigint
pg_stat_get_bgwriter_buf_written_clean()
Description: Specifies the number of buffers written by the background writer for routine cleaning of dirty pages.
Return type: bigint
pg_stat_get_bgwriter_maxwritten_clean()
Description: Specifies the time when the background writer stops its cleaning scan because it has written more buffers than specified in the bgwriter_lru_maxpages parameter.
Return type: bigint
pg_stat_get_buf_written_backend()
Description: Specifies the number of buffers written by the backend because they need to allocate a new buffer.
Return type: bigint
pg_stat_get_buf_alloc()
Description: Specifies the total number of the allocated buffers.
Return type: bigint
pg_stat_clear_snapshot()
Description: Discards the current statistics snapshot.
Return type: void
pg_stat_reset()
Description: Resets all statistics counters for the current database to zero (requires system administrator permissions).
Return type: void
pg_stat_reset_shared(text)
Description: Resets all statistics counters for the current database in each node in a shared cluster to zero (requires system administrator permissions).
Return type: void
pg_stat_reset_single_table_counters(oid)
Description: Resets statistics for a single table or index in the current database to zero (requires system administrator permissions).
Return type: void
pg_stat_reset_single_function_counters(oid)
Description: Resets statistics for a single function in the current database to zero (requires system administrator permissions).
Return type: void
pg_stat_session_cu(int, int, int)
Description: Obtains the compression unit (CU) hit statistics of sessions running on the current node.
Return type: record
pg_stat_get_cu_mem_hit(oid)
Description: Obtains the number of CU memory hits of a column storage table in the current database of the current node.
Return type: bigint
pg_stat_get_cu_hdd_sync(oid)
Description: Obtains the times CU is synchronously read from a disk by a column storage table in the current database of the current node.
Return type: bigint
pg_stat_get_cu_hdd_asyn(oid)
Description: Obtains the times CU is asynchronously read from a disk by a column storage table in the current database of the current node.
Return type: bigint
pg_stat_get_db_cu_mem_hit(oid)
Description: Obtains the CU memory hit in a database of the current node.
Return type: bigint
pg_stat_get_db_cu_hdd_sync(oid)
Description: Obtains the times CU is synchronously read from a disk by a database of the current node.
Return type: bigint
fenced_udf_process(integer)
Description: Shows the number of local UDF Master and Work processes. If the input parameter is set to 1, the number of Master processes is queried. If the input parameter is set to 2, the number of Worker processes is queried. If the input parameter is set to 3, all Worker processes are killed.
Return type: text
total_cpu()
Description: Obtains the CPU time used by the current node, in jiffies.
Return type: bigint
mot_global_memory_detail()
Description: Checks the size of the MOT global memory, including data and indexes.
Return type: record
mot_local_memory_detail()
Description: Checks the size of the MOT local memory, including data and indexes.
Return type: record
mot_session_memory_detail()
Description: Checks the MOT memory usage of all sessions.
Return type: record
total_memory()
Description: Obtains the size of the virtual memory used by the current node, in KB.
Return type: bigint
pg_stat_get_db_cu_hdd_asyn(oid)
Description: Obtains the times CU is asynchronously read from a disk by a database of the current node.
Return type: bigint
pg_stat_bad_block(text, int, int, int, int, int, timestamp with time zone, timestamp with time zone)
Description: Obtains damage information about pages or CUs after the current node is started.
Example: select * from pg_stat_bad_block();
Return type: record
pg_stat_bad_block_clear()
Description: Deletes the page and CU damage information that is read and recorded on the node (requires system administrator permissions).
Return type: void
gs_respool_exception_info(pool text)
Description: Queries the query rule of a specified resource pool.
Return type: record

gs_control_group_info(pool text)

Description: Queries information about Cgroups associated with a resource pool.

Return type: record

The command output is as follows:

Attribute	Value	Description
name	class_a:workload_a1	Class name and workload name
class	class_a	Class Cgroup name
workload	workload_a1	Workload Cgroup name
type	DEFWD	Cgroup type (Top, CLASS, BAKWD, DEFWD, and TSWD)
gid	87	Cgroup ID
shares	30	Percentage of CPU resources to those on the parent node
limits	0	Percentage of CPU cores to those on the parent node
rate	0	Allocation ratio in Timeshare
cpucores	0-3	Number of CPU cores

gs_all_control_group_info()
Description: Collects information about all Cgroups in the database.
Return type: record
gs_get_control_group_info()
Description: Collects information about all Cgroups.
Return type: record

get_instr_workload_info(integer)

Description: Obtains the transaction volume and time information on the primary database node.

Return type: record

Attribute	Value	Description
resourcepool_oid	10	OID of the resource pool (the logic is equivalent to the load)
commit_counter	4	Number of frontend transactions that were committed
rollback_counter	1	Number of frontend transactions that were rolled back
resp_min	949	Minimum response time of frontend transactions (unit: μs)
resp_max	201891	Maximum response time of frontend transactions (unit: μs)
resp_avg	43564	Average response time of frontend transactions (unit: μs)
resp_total	217822	Total response time of frontend transactions (unit: μs)
bg_commit_counter	910	Number of backend transactions that were committed
bg_rollback_counter	0	Number of backend transactions that were rolled back
bg_resp_min	97	Minimum response time of backend transactions (unit: μs)
bg_resp_max	678080687	Maximum response time of backend transactions (unit: μs)
bg_resp_avg	327847884	Average response time of backend transactions (unit: μs)
bg_resp_total	298341575300	Total response time of backend transactions (unit: μs)

pv_instance_time()

Description: Obtains the time consumed in each execution phase on the current node.

Return type: record

Stat_name Attribute	Value	Description
DB_TIME	1062385	Total end-to-end wall time consumed by all threads (unit: μs)
CPU_TIME	311777	Total CPU time consumed by all threads (unit: μs)
EXECUTION_TIME	380037	Total time consumed on the executor (unit: μs)
PARSE_TIME	6033	Total time consumed for parsing SQL statements (unit: μs)
PLAN_TIME	173356	Total time consumed for generating an execution plan (unit: μs)
REWRITE_TIME	2274	Total time consumed on query rewriting (unit: μs)
PL_EXECUTION_TIME	0	Total time consumed for executing PL/SQL statements (unit: μs)
PL_COMPILATION_TIME	557	Total time consumed for SQL compilation (unit: μs)
NET_SEND_TIME	1673	Total time consumed for sending data over network (unit: μs)
DATA_IO_TIME	426622	Total time consumed for data read and write (unit: μs)

DBE_PERF.get_global_instance_time()
Description: Provides the time consumed in each key phase in openGauss. To query this function, you must have the sysadmin permission.
Return type: record
get_instr_unique_sql()
Description: Obtains information about execution statements (normalized SQL statements) on the current node as a user with the sysadmin permission.
Return type: record
reset_unique_sql(text, text, bigint)
Description: Resets information about system execution statements (normalized SQL statements) information as a user with the sysadmin permission. The value of the first parameter can be** global** or local. global indicates that information on all nodes is cleared, and local indicates that only information on the current node is cleared. The value of the second parameter can be ALL, BY_USERID, or BY_CNID. ALL indicates that all information is cleared. BY_USERID indicates that the SQL information of the user specified by USERID is cleared. BY_CNID indicates that the SQL information related to the primary node of the database in the system is cleared. The third parameter indicates CNID and USERID. If the second parameter is set to ALL, the third parameter does not take effect and can be set to any value.
Return type: Boolean
NOTE: This function involves distributed nodes. Currently, openGauss is a centralized database, for which the function of the value global is the same as that of the value local and the second parameter cannot set to be BY_CNID.
get_instr_wait_event(NULL)
Description: Obtains the statistics on wait events of the current node.
Return type: record
get_instr_user_login()
Description: Obtains the number of user login and logout times on the current node. Only users with the sysadmin or monitor admin permission can execute this function.
Return type: record
get_instr_rt_percentile(integer)
Description: Obtains the SQL response time P80 and P95 distribution information of the database.
Return type: record
get_node_stat_reset_time()
Description: Obtains statistics about reset (restart, primary/standby switchover, and database deletion) time of the current node.
Return type: record
DBE_PERF.get_global_os_runtime()
Description: Displays the running status of the current operating system. To query this function, you must have the sysadmin permission.
Return type: record
DBE_PERF.get_global_os_threads()
Description: Provides information about the threads under all normal nodes of openGauss. To query this function, you must have the sysadmin permission.
Return type: record
DBE_PERF.get_summary_workload_sql_count()
Description: Provides statistics about the number of SELECT, UPDATE, INSERT, DELETE, DDL, DML, and DCL statements of different service loads in openGauss. To query this function, you must have the sysadmin permission.
Return type: record
DBE_PERF.get_summary_workload_sql_elapse_time()
Description: Provides statistics about the number of SELECT, UPDATE, INSERT, and DELETE statements and response time information (TOTAL, AVG, MIN, and MAX) for different loads in openGauss. To query this function, you must have the sysadmin permission.
Return type: record
DBE_PERF.get_global_workload_transaction()
Description: Obtains the transaction volume and time information on all nodes of openGauss. To query this function, you must have the sysadmin permission.
Return type: record
DBE_PERF.get_global_session_stat()
Description: Obtains the session status information on all nodes of openGauss. To query this function, you must have the sysadmin permission.
Return type: record
NOTE: The status information contains the following 17 items: commit, rollback, sql, table_scan, blocks_fetched, physical_read_operation, shared_blocks_dirtied, local_blocks_dirtied, shared_blocks_read, local_blocks_read, blocks_read_time, blocks_write_time, sort_imemory, sort_idisk, cu_mem_hit, cu_hdd_sync_read, and cu_hdd_asyread.
DBE_PERF.get_global_session_time()
Description: Provides the time consumed in each key phase of each node in openGauss. To query this function, you must have the sysadmin permission.
Return type: record
DBE_PERF.get_global_session_memory()
Description: Displays statistics about memory usage at the session level on each node in the unit of MB, including all the memory allocated to Postgres and stream threads on DNs for jobs currently executed by users. To query this function, you must have the sysadmin permission.
Return type: record
DBE_PERF.get_global_session_memory_detail()
Description: Displays statistics about thread memory usage on each node by MemoryContext node. To query this function, you must have the sysadmin permission.
Return type: record
create_wlm_session_info(int flag)
Description: Clears top SQL query statement-level statistics recorded in the current memory. Only the administrator can execute this function.
Return type: int
pg_stat_get_wlm_session_info(int flag)
Description: Obtains top SQL query statement-level statistics recorded in the current memory. If the input parameter is not 0, the information is cleared from the memory. Only users with the system admin or monitor admin permission can execute this function.
Return type: record

gs_paxos_stat_replication()

Description: Queries the standby server information on the primary server. Currently, only the centralized DCF mode is supported.

Return type: setofrecord

The following table describes return columns.

Column	Type	Description
local_role	text	Role of the node that sends logs
peer_role	text	Role of the node that receives logs
local_dcf_role	text	DCF role of the node that sends logs
peer_dcf_role	text	DCF role of the node that receives logs
peer_state	text	Status of the node that receives logs
sender_write_location	text	Location in the Xlog buffer where the node that sends logs is written
sender_commit_location	text	Consistency point reached for the DCF logs of the node that sends logs
sender_flush_location	text	Location in the Xlog disk where the node that sends logs is written
sender_replay_location	text	Location where the node that sends logs replays logs
receiver_write_location	text	Location in the Xlog buffer where the node that receives logs is written
receiver_commit_location	text	Consistency point reached for the DCF logs of the node that receives logs
receiver_flush_location	text	Location in the Xlog disk where the node that receives logs is written
receiver_replay_location	text	Location where the node that receives logs replays Xlogs
sync_percent	text	Synchronization percentage
dcf_run_mode	int4	DCF synchronization mode
channel	text	Channel information

gs_wlm_get_resource_pool_info(int)
Description: Obtains resource usage statistics of all users. The input parameter can be any value of the INT type or be null.
Return type: record
gs_wlm_get_all_user_resource_info()
Description: Obtains resource usage statistics of all users.
Return type: record
gs_wlm_get_user_info(int)
Description: Obtains information about all users. The input parameter can be any value of the INT type or be null. Only users with the sysadmin permission can execute this function.
Return type: record
gs_wlm_get_workload_records()
Description: Obtains all job information in dynamic load management. This function is valid only when dynamic load management is enabled.
Return type: record
gs_wlm_readjust_user_space()
Description: Corrects the storage space usage of all users. Only the administrator can execute this function.
Return type: record
gs_wlm_readjust_user_space_through_username(text name)
Description: Corrects the storage space usage of a specified user. Common users can use this function to modify only their own usage. Only the administrator can modify the usage of all users. If the value of name is 0000, the usage of all users needs to be modified.
Return type: record
gs_wlm_readjust_user_space_with_reset_flag(text name, boolean isfirst)
Description: Corrects the storage space usage of a specified user. If the input parameter isfirst is set to true, statistics are collected from 0. Otherwise, statistics are collected from the previous result. Common users can use this function to modify only their own usage. Only the administrator can modify the usage of all users. If the value of name is 0000, the usage of all users needs to be modified.
Return type: record
gs_wlm_session_respool(bigint)
Description: Obtains the session resource pool information about all backend threads. The input parameter can be any value of the bigint type or can be null.
Return type: record
gs_wlm_get_session_info()
Description: This API has been discarded and is unavailable currently.
gs_wlm_get_user_session_info()
Description: This API has been discarded and is unavailable currently.
gs_io_wait_status()
Description: This API does not support single-node systems or centralized systems and is unavailable currently.
global_stat_get_hotkeys_info()
Description: Obtains the statistics on hot keys in the entire database instance. This API does not support single-node systems or centralized systems and is unavailable currently.
global_stat_clean_hotkeys()
Description: Clears statistics on hot keys in the entire database instance. This API does not support single-node systems or centralized systems and is unavailable currently.
DBE_PERF.get_global_session_stat_activity()
Description: Displays information about threads that are running on each node in openGauss. To query this function, you must have the monitoradmin permission.
Return type: record
DBE_PERF.get_global_thread_wait_status()
Description: Displays the block waiting status of backend threads and auxiliary threads on all nodes. To query this function, you must have the sysadmin or monitoradmin permission.
Return type: record
DBE_PERF.get_global_operator_history_table()
Description: Displays the operator-related records (persistent) generated after jobs are executed on the primary database node of the current user. To query this function, you must have the sysadmin and monitoradmin permissions.
Return type: record
DBE_PERF.get_global_operator_history()
Description: Displays the operator-related records generated after jobs are executed on the primary database node of the current user. To query this function, you must have the sysadmin and monitoradmin permissions.
Return type: record
DBE_PERF.get_global_operator_runtime()
Description: Displays real-time operator-related records of jobs executed on the primary database node of the current user. To query this function, you must have the sysadmin and monitoradmin permissions.
Return type: record
DBE_PERF.get_global_statement_complex_history()
Description: Displays the historical records of complex queries on the primary database node of the current user. To query this function, you must have the monitoradmin permission.
Return type: record
DBE_PERF.get_global_statement_complex_history_table()
Description: Displays the historical records (persistent) of complex queries on the primary database node of the current user. To query this function, you must have the monitoradmin permission.
Return type: record
DBE_PERF.get_global_statement_complex_runtime()
Description: Displays the real-time information of complex queries on the primary database node of the current user. To query this function, you must have the sysadmin or monadmin permission.
Return type: record
DBE_PERF.get_global_memory_node_detail()
Description: Displays the memory usage of a certain database on all nodes. To query this function, you must have the monitoradmin permission.
Return type: record
DBE_PERF.get_global_shared_memory_detail()
Description: Displays the usage information about all the shared memory contexts of all nodes. To query this function, you must have the monitoradmin permission.
Return type: record
DBE_PERF.get_global_statio_all_indexes()
Description: Displays statistics about each index displayed in a row in the current database, showing I/O statistics about accesses to that specific index. To query this function, you must have the sysadmin permission.
Return type: record
DBE_PERF.get_summary_stat_all_tables()
Description: Displays statistics about a row in each table (including the TOAST table) on each node.
Return type: record
DBE_PERF.get_global_stat_all_tables()
Description: Displays statistics about a row in each table (including the TOAST table) on each node.
Return type: record
DBE_PERF.get_local_toastname_and_toastindexname()
Description: Provides the mapping between the name and index of the local TOAST table and its associated table. To query this function, you must have the sysadmin permission.
Return type: record
DBE_PERF.get_summary_statio_all_indexes()
Description: Collects statistics about each index displayed in a row in the current databases of all nodes and displays the I/O statistics of a specific index. To query this function, you must have the sysadmin permission.
Return type: record
DBE_PERF.get_global_statio_all_sequences()
Description: Provides I/O status information about all sequences in the namespace. To query this function, you must have the sysadmin permission.
Return type: record
DBE_PERF.get_global_statio_all_tables()
Description: Displays the I/O statistics about each table in databases on each node. To query this function, you must have the sysadmin permission.
Return type: record
DBE_PERF.get_summary_statio_all_tables()
Description: Collects I/O statistics about each table in databases in openGauss. To query this function, you must have the sysadmin permission.
Return type: record
DBE_PERF.get_local_toast_relation()
Description: Provides the mapping between the name of the local TOAST table and its associated table. To query this function, you must have the sysadmin permission.
Return type: record
DBE_PERF.get_global_statio_sys_indexes()
Description: Displays the I/O status information about all system catalog indexes in namespaces on each node. To query this function, you must have the sysadmin permission.
Return type: record
DBE_PERF.get_summary_statio_sys_indexes()
Description: Collects the I/O status information about all system catalog indexes in namespaces on each node. To query this function, you must have the sysadmin permission.
Return type: record
DBE_PERF.get_global_statio_sys_sequences()
Description: Provides the I/O status information about all the system sequences in the namespace. To query this function, you must have the sysadmin permission.
Return type: record
DBE_PERF.get_global_statio_sys_tables()
Description: Provides I/O status information about all system catalogs in namespaces on each node. To query this function, you must have the sysadmin permission.
Return type: record
DBE_PERF.get_summary_statio_sys_tables()
Description: Displays the I/O status information of all system catalogs in the namespace in openGauss. To query this function, you must have the sysadmin permission.
Return type: record
DBE_PERF.get_global_statio_user_indexes()
Description: Displays the I/O status information about all user relationship table indexes in namespaces on each node. To query this function, you must have the sysadmin permission.
Return type: record
DBE_PERF.get_summary_statio_user_indexes()
Description: Displays the I/O status information about all user relationship table indexes in namespaces in openGauss. To query this function, you must have the sysadmin permission.
Return type: record
DBE_PERF.get_global_statio_user_sequences()
Description: Displays the I/O status information about all user sequences in the namespace of each node. To query this function, you must have the sysadmin permission.
Return type: record
DBE_PERF.get_global_statio_user_tables()
Description: Displays the I/O status information about all user relationship tables in namespaces on each node. To query this function, you must have the sysadmin permission.
Return type: record
DBE_PERF.get_summary_statio_user_tables()
Description: Displays the I/O status information about all user relationship tables in namespaces in openGauss. To query this function, you must have the sysadmin permission.
Return type: record
DBE_PERF.get_stat_db_cu()
Description: Queries CU hits in a database and in each node in openGauss. To query this function, you must have the sysadmin permission.
Return type: record
DBE_PERF.get_global_stat_all_indexes()
Description: Displays statistics of each index in databases on all nodes. To query this function, you must have the sysadmin permission.
Return type: record
DBE_PERF.get_summary_stat_all_indexes()
Description: Collects statistics of each index in all databases on all nodes. To query this function, you must have the sysadmin permission.
Return type: record
DBE_PERF.get_global_stat_sys_tables()
Description: Displays statistics about the system catalogs of all the namespaces in pg_catalog and information_schema schemas on each node. To query this function, you must have the sysadmin permission.
Return type: record
DBE_PERF.get_summary_stat_sys_tables()
Description: Collects statistics about the system catalogs of all the namespaces in pg_catalog and information_schema schemas on each node. To query this function, you must have the sysadmin permission.
Return type: record
DBE_PERF.get_global_stat_sys_indexes()
Description: Displays index status information about all the system catalogs in the pg_catalog and information_schema schemas on each node. To query this function, you must have the sysadmin permission.
Return type: record
DBE_PERF.get_summary_stat_sys_indexes()
Description: Collects statistics about index status information about all the system catalogs in the pg_catalog and information_schema schemas on each node. To query this function, you must have the sysadmin permission.
Return type: record
DBE_PERF.get_global_stat_user_tables()
Description: Displays the status information about customized ordinary tables in all namespaces. To query this function, you must have the sysadmin permission.
Return type: record
DBE_PERF.get_summary_stat_user_tables()
Description: Collects statistics about the status information about customized ordinary tables in all namespaces. To query this function, you must have the sysadmin permission.
Return type: record
DBE_PERF.get_global_stat_user_indexes()
Description: Displays the status information about the index of customized ordinary tables in all databases. To query this function, you must have the sysadmin permission.
Return type: record
DBE_PERF.get_summary_stat_user_indexes()
Description: Collects statistics about the status information about the index of customized ordinary tables in all databases. To query this function, you must have the sysadmin permission.
Return type: record
DBE_PERF.get_global_stat_database()
Description: Displays database statistics of all nodes. To query this function, you must have the sysadmin permission.
Return type: record
DBE_PERF.get_global_stat_database_conflicts()
Description: Collects statistics on the database of all nodes. To query this function, you must have the sysadmin permission.
Return type: record
DBE_PERF.get_global_stat_xact_all_tables()
Description: Displays transaction status information about all ordinary tables and TOAST tables in all namespaces. To query this function, you must have the sysadmin permission.
Return type: record
DBE_PERF.get_summary_stat_xact_all_tables()
Description: Collects statistics about transaction status information about all ordinary tables and TOAST tables in all namespaces. To query this function, you must have the sysadmin permission.
Return type: record
DBE_PERF.get_global_stat_xact_sys_tables()
Description: Displays transaction status information about all system catalogs in namespaces on all nodes. To query this function, you must have the sysadmin permission.
Return type: record
DBE_PERF.get_summary_stat_xact_sys_tables()
Description: Collects statistics about transaction status information about all system catalogs in namespaces on all nodes. To query this function, you must have the sysadmin permission.
Return type: record
DBE_PERF.get_global_stat_xact_user_tables()
Description: Displays the transaction status information of the user tables in the namespaces on all nodes. To query this function, you must have the sysadmin permission.
Return type: record
DBE_PERF.get_summary_stat_xact_user_tables()
Description: Collects statistics about the transaction status information of the user tables in the namespaces on all nodes. To query this function, you must have the sysadmin permission.
Return type: record
DBE_PERF.get_global_stat_user_functions()
Description: Displays the transaction status information of customized functions in the namespaces on all nodes. To query this function, you must have the sysadmin permission.
Return type: record
DBE_PERF.get_global_stat_xact_user_functions()
Description: Collects statistics about the transaction status information of customized functions in the namespaces on all nodes. To query this function, you must have the sysadmin permission.
Return type: record
DBE_PERF.get_global_stat_bad_block()
Description: Displays information about table and index read failures on all nodes. To query this function, you must have the sysadmin permission.
Return type: record
DBE_PERF.get_global_file_redo_iostat()
Description: Collects statistics on information about table and index read failures on all nodes. To query this function, you must have the sysadmin permission.
Return type: record
DBE_PERF.get_global_file_iostat()
Description: Displays statistics about data file I/Os on all nodes. To query this function, you must have the sysadmin permission.
Return type: record
DBE_PERF.get_global_locks()
Description: Displays lock information of all nodes. To query this function, you must have the sysadmin or monadmin permission.
Return type: record
DBE_PERF.get_global_replication_slots()
Description: Displays logical replication information on all nodes. To query this function, you must have the sysadmin or monadmin permission.
Return type: record
DBE_PERF.get_global_bgwriter_stat()
Description: Displays statistics about the background writer process's activities on all nodes. To query this function, you must have the sysadmin permission.
Return type: record
DBE_PERF.get_global_replication_stat()
Description: Displays information about log synchronization status on each node, such as the locations where the sender sends logs and where the receiver receives logs. To query this function, you must have the sysadmin or monadmin permission.
Return type: record
DBE_PERF.get_global_transactions_running_xacts()
Description: Displays information about running transactions on each node. To query this function, you must have the sysadmin permission.
Return type: record
DBE_PERF.get_summary_transactions_running_xacts()
Description: Collects statistics of information about running transactions on each node. To query this function, you must have the sysadmin permission.
Return type: record
DBE_PERF.get_global_transactions_prepared_xacts()
Description: Displays information about transactions that are currently prepared for two-phase commit on each node. To query this function, you must have the sysadmin permission.
Return type: record
DBE_PERF.get_summary_transactions_prepared_xacts()
Description: Collects statistics information about transactions that are currently prepared for two-phase commit on each node. To query this function, you must have the sysadmin permission.
Return type: record
DBE_PERF.get_summary_statement()
Description: Displays the status information of the historically-executed statements on each node. To query this function, you must have the sysadmin and monitor admin permissions.
Return type: record
DBE_PERF.get_global_statement_count()
Description: Displays the number of SELECT, UPDATE, INSERT, and DELETE statements and response time information (TOTAL, AVG, MIN, and MAX) on each node. To query this function, you must have the sysadmin permission.
Return type: record
DBE_PERF.get_global_config_settings()
Description: Displays GUC parameter configuration information on each node. To query this function, you must have the sysadmin permission.
Return type: record
DBE_PERF.get_global_wait_events()
Description: Displays the wait event status information on each node. To query this function, you must have the sysadmin permission.
Return type: record
DBE_PERF.get_statement_responsetime_percentile()
Description: Obtains the response time distribution for 80% and 95% SQL statements of openGauss. To query this function, you must have the sysadmin permission.
Return type: record
DBE_PERF.get_summary_user_login()
Description: Collects statistics about number of user login and logout times on each node in openGauss. To query this function, you must have the sysadmin permission.
Return type: record
DBE_PERF.get_global_record_reset_time()
Description: Displays the statistics about reset (restart, primary/standby switchover, and database deletion) time of openGauss. To query this function, you must have the sysadmin permission.
Return type: record
DBE_PERF.track_memory_context(context_list text)
Description: Sets the memory context whose memory application details need to be collected. The input parameter is the memory context names, which are separated by commas (,), for example, ThreadTopMemoryContext, SessionCacheMemoryContext. Note that the memory context names are context-sensitive. In addition, the length of a single memory context is 63, and the excess part is truncated. The maximum number of memory contexts that can be collected at a time is 16. If the number of memory contexts exceeds 16, the setting fails. Each time this function is called, the previous statistics result is cleared. When the input parameter is set to "", the statistics function is disabled. Only the initial user (super user) or a user with the **monadmin **permission can execute this function.
Return type: Boolean
DBE_PERF.track_memory_context_detail()
Description: Obtains the memory application details of the memory context specified by the DBE_PERF.track_memory_context function. For details, see the DBE_PERF.track_memory_context_detail view. Only the initial user (super user) or a user with the **monadmin **permission can execute this function.
Return type: record
pg_stat_get_mem_mbytes_reserved(tid)
Description: Collects statistics on variables related to resource management, which is used only for fault locating.
Parameter: thread ID
Return type: text
gs_wlm_user_resource_info(name text)
Description: Queries a user's resource quota and resource usage.
Return type: record
pg_stat_get_file_stat()
Description: Rrecords statistics about data file I/Os to indicate I/O performance and detect performance problems such as abnormal I/O operations.
Return type: record
pg_stat_get_redo_stat()
Description: Displays statistics on the replay of session thread logs.
Return type: record
pg_stat_get_status(int8)
Description: Tests the block waiting status about the backend thread and auxiliary thread of the current instance.
Return type: record
get_local_rel_iostat()
Description: Queries the accumulated I/O status of data files on the current node.
Return type: record
DBE_PERF.get_global_rel_iostat()
Description: Displays statistics about data file I/Os on all nodes. To query this function, you must have the sysadmin permission.
Return type: record
DBE_PERF.global_threadpool_status()
Description: Displays the status of worker threads and sessions in thread pools on all nodes. For details about the columns returned by the function, see GLOBAL_THREADPOOL_STATUS.
Return type: record
remote_bgwriter_stat()
Description: Displays the information about pages flushed by the bgwriter threads of all instances in the database, number of pages in the candidate buffer chain, and buffer elimination information (except for the local node and not available on the DN).
Return type: record
pv_os_run_info
Description: Displays the running status of the current OS. For details about the columns, see GS_OS_RUN_INFO.
Parameter: nan
Return type: SETOF record
pv_session_stat
Description: Collects session status information by session thread or AutoVacuum thread. For details about the columns, see GS_SESSION_STAT.
Parameter: nan
Return type: SETOF record
pv_session_time
Description: Collects statistics on the running time of session threads and the time consumed in each execution phase. For details about the columns, see GS_SESSION_TIME.
Parameter: nan
Return type: SETOF record
pg_stat_get_db_temp_bytes
Description: Collects statistics on the total amount of data written to temporary files through database query. All temporary files are counted, regardless of why the temporary file was created, and regardless of the log_temp_files setting.
Parameter: oid
Return type: bigint
pg_stat_get_db_temp_files
Description: Queries the number of temporary files created in the database. All temporary files are counted, regardless of why the temporary file was created (for example, sorting or hashing), and regardless of the log_temp_files setting.
Parameter: oid
Return type: bigint
remote_candidate_stat()
Description: Displays the checkpoint information and log flushing information about all instances in the database (except the current node). Centralized systems are not supported.
Return type: record

dbe_perf.gs_stat_activity_timeout(int)

Description: Obtains information about query jobs whose execution time exceeds the timeout threshold on the current node. The correct result can be returned only when the GUC parameter track_activities is set to on. The timeout threshold ranges from 0 to 2147483.

Return type: SETOF record

Name	Type	Description
database	name	Name of the database to which a user session is connected
pid	bigint	Backend thread ID
sessionid	bigint	Session ID
usesysid	oid	OID of the user logged in to the backend
application_name	text	Name of the application connected to the backend
query	text	Query that is being executed on the backend
xact_start	timestamptz	Time when the current transaction is started
query_start	timestamptz	Time when the current query starts
query_id	bigint	Query statement ID

gs_wlm_user_resource_info(name text)
Description: Queries a user's resource quota and resource usage. Common users can query only their own information. Administrators can query information about all users.
Return type: record
create_wlm_instance_statistics_info
Description: Saves the historical monitoring data of the current instance persistently.
Parameter: nan
Return type: integer

gs_session_memory

Description: Collects statistics about memory usage at the session level in the unit of MB, including all the memory allocated to Postgres and Stream threads on DNs for tasks currently executed by users.

NOTE: If enable_memory_limit is set to off, this function cannot be used.

Return type: record

Table 8 Return value description

Name	Type	Description
sessid	text	Thread start time and ID
init_mem	integer	Memory allocated to the currently executed jobs before they enter the executor, in MB
used_mem	integer	Memory allocated to the currently executed jobs, in MB
peak_mem	integer	Peak memory allocated to the currently executed jobs, in MB

gs_wlm_persistent_user_resource_info()
Description: Archives all user resource usage statistics to the gs_wlm_user_resource_history system catalog. To query this function, you must have the sysadmin permission.
Return type: record
create_wlm_operator_info(int flag)
Description: Clears top SQL operator-level statistics recorded in the current memory. If the input parameter is greater than 0, the information is archived to gs_wlm_operator_info and gs_wlm_ec_operator_info. Otherwise, the information is not archived. Only users with the sysadmin permission can execute this function.
Return type: int

GS_ALL_NODEGROUP_CONTROL_GROUP_INFO(text)

Description: Provides Cgroup information for all logical database instances. Before calling this function, you need to specify the name of the logical database instance to be queried. For example, to query the Cgroup information for the installation logical database instance, run the following command:

SELECT * FROM GS_ALL_NODEGROUP_CONTROL_GROUP_INFO('installation')

Return type: record

The following table describes return columns.

Name	Type	Description
name	text	Cgroup name.
type	text	Cgroup type.
gid	bigint	Cgroup ID.
classgid	bigint	ID of the Class cgroup where a Workload cgroup belongs.
class	text	Class cgroup.
workload	text	Workload cgroup.
shares	bigint	CPU quota allocated to the cgroup.
limits	bigint	Limit of CPUs allocated to a cgroup.
wdlevel	bigint	Workload cgroup level.
cpucores	text	Usage of CPU cores in a cgroup.

gs_total_nodegroup_memory_detail
Description: Returns information about the memory used by the current logical database, in MB.
Return type: SETOF record

local_redo_time_count()

Description: Returns the time consumption statistics on each process of each playback thread on the current node (valid data exists only on the standby node).

The return values are as follows:

local_redo_time_count parameters

Column	Description
thread_name	Thread name
step1_total	Total duration of step 1. The process of each thread is as follows: Ultimate RTO batch redo: obtains a log from a queue. redo manager: obtains a log from a queue. redo worker: obtains a log from a queue. trxn manager: reads a log from a queue. trxn worker: reads a log from a queue. read worker: reads an Xlog page (overall) from a file. read page worker: obtains a log from a queue. startup: obtains a log from a queue. Parallel replay: page redo: obtains a log from a queue. startup: reads a log.
step1_count	Number of accumulated execution times of step 1.
step2_total	Total duration of step 2. The process of each thread is as follows: Ultimate RTO batch redo: processes logs (overall). redo manager: processes logs (overall). redo worker: processes logs (overall). trxn manager: processes logs (overall). trxn worker: processes logs (overall). redo worker: specifies the time required for reading the Xlog page. read page worker: generates and sends LSN forwarders. startup: checks whether to replay to the specified position. Parallel replay: page redo: processes logs (overall). startup: checks whether to replay to the specified position.
step2_count	Number of accumulated execution times of step 2.
step3_total	Total duration of step 3. The process of each thread is as follows: Ultimate RTO batch redo: updates the standby state. redo manager: processes data logs. redo worker: replays page logs (overall). trxn manager: updates the flush LSN. trxn worker: replays logs. redo worker: pushes the Xlog segment. read page worker: obtains a new item. startup: collects statistics on the wait time of delayed replay feature. Parallel replay: page redo: updates the standby state. startup: collects statistics on the wait time of delayed replay feature.
step3_count	Number of accumulated execution times of step 3.
step4_total	Total duration of step 4. The process of each thread is as follows: Ultimate RTO: batch redo: parses Xlogs. redo manager: processes DDL. redo worker: reads data pages. trxn manager: synchronizes the wait time. trxn worker: updates the LSN of the current thread. read page worker: stores logs in the distribution thread. startup: distributes logs (overall). Parallel replay: page redo: replays undo logs. startup: distributes logs (overall).
step4_count	Number of accumulated execution times of step 4.
step5_total	Total duration of step 5. The process of each thread is as follows: Ultimate RTO: batch redo: distributes logs to the redo manager. redo manager: distributes logs to redo workers. redo worker: replays data page logs. trxn manager: distributes data to the trxn worker. trxn worker: forcibly synchronizes the wait time. read page worker: updates the LSN of the current thread. startup: decodes logs. Parallel replay: page redo: replays sharetrxn logs. startup: replays logs.
step5_count	Number of accumulated execution times of step 5.
step6_total	Total duration of step 6. The process of each thread is as follows: Ultimate RTO: redo worker: replays non-data page logs. trxn manager: updates global LSNs. read page worker: performs log CRC check. Parallel replay: page redo: replays synctrxn logs. startup: forcibly synchronizes the wait time.
step6_count	Number of accumulated execution times of step 6.
step7_total	Total duration of step 7. The process of each thread is as follows: Ultimate RTO: redo worker: updates FSM. Parallel replay: page redo: replays a single log.
step7_count	Number of accumulated execution times of step 7.
step8_total	Total duration of step 8. The process of each thread is as follows: Ultimate RTO: redo worker: forcibly synchronizes the wait time. Parallel replay: page redo: replays all workers do log.
step8_count	Number of accumulated execution times of step 8.
step9_total	Total duration of step 9. The process of each thread is as follows: Ultimate RTO: None Parallel replay: page redo: replays muliti workers do log.
step9_count	Number of accumulated execution times of step 9.

local_xlog_redo_statics()

Description: Returns the statistics oneach type of logs that have been replayed on the current node (valid data exists only on the standby node).

The return values are as follows:

Table 9 local_xlog_redo_statics parameters

Column	Description
xlog_type	Log types.
rmid	resource manager id
info	xlog operation
num	Number of logs.
extra	Valid values are available for page replay logs and xact logs. The page replay log indicates the number of pages read from the disk. The xact log indicates the number of deleted files.

gs_get_shared_memctx_detail(text)

Description: Returns the memory application details of the specified memory context, including the file, line number, and size of each memory application (the size of the same line in the same file is accumulated). Only the memory context queried through the pg_shared_memory_detail view can be queried. The input parameter is the memory context name (that is, the contextname column in the result returned by the pg_shared_memory_detail view). To query the function, you must have the SYSADMIN or MONITOR ADMIN permission.

Return type: SETOF record

Name	Type	Description
file	text	Name of the file where the memory is applied for.
line	int8	Line number of the code in the file where the requested memory is located.
size	int8	Size of the applied memory. The value is accumulated if the memory is applied for multiple times in the same line of the same file.

NOTE: This view is not supported in the Lite release version.

gs_get_session_memctx_detail(text)

Description: Returns the memory application details of the specified memory context, including the file, line number, and size of each memory application (the size of the same line in the same file is accumulated). This parameter is valid only in thread pool mode. Only the memory context queried through the gs_session_memory_context view can be queried. The input parameter is the memory context name (that is, the contextname column in the result returned by the gs_session_memory_context view). To query the function, you must have the **sysadmin **or monitor admin permission.

Return type: SETOF record

Name	Type	Description
file	text	Name of the file where the memory is applied for.
line	int8	Line number of the code in the file where the requested memory is located.
size	int8	Size of the applied memory. The value is accumulated if the memory is applied for multiple times in the same line of the same file.

NOTE: This view takes effect only in thread pool mode and is not supported in the Lite release version.

gs_get_thread_memctx_detail(tid,text)

Description: Returns the memory application details of the specified memory context, including the file, line number, and size of each memory application (the size of the same line in the same file is accumulated). Only the memory context queried through the gs_thread_memory_context view can be queried. The first input parameter is the thread ID (the tid column of the data returned by the gs_thread_memory_context), and the second parameter is the memory context name (the contextname column of the data returned by gs_thread_memory_context). To query the function, you must have the **sysadmin **or monitor admin permission.

Return type: SETOF record

Name	Type	Description
file	text	Name of the file where the memory is applied for.
line	int8	Line number of the code in the file where the requested memory is located.
size	int8	Size of the applied memory, in bytes. The value is accumulated if the memory is applied for multiple times in the same line of the same file.

NOTE: This view is not supported in the Lite release version.

DBE_PERF.standby_statement_history(bool [, time1, time2]) Parameters:
- bool only_slow: determines whether to query only slow SQL statements. The value true indicates yes, and the value false or NULL indicates that all SQL statements are queried.
- VARIADIC timestamptz finish_time: Optional. You can enter a maximum of time1 and time2, indicating the time segment to which finish_time of the queried SQL statement belongs.
Description: Queries full SQL statements on the standby node. The primary node queries full SQL statements using the statement_history table, while the standby node queries using this function. Only the initial user or a user with the monadmin permission can execute this function.
Return type: record, which is the same as that in the statement_history table.
NOTE:
- The value true of the first bool parameter indicates that only slow SQL statements are queried, which is equivalent to select. where is_slow_sql = true;. The value false or NULL indicates that all SQL statements are queried, that is, **is_slow_sql **is not filtered.
- The two time parameters time1 and time2 indicate the time segment to which finish_time of the queried SQL statement belongs. They indicate the start time and end time respectively. If NULL or no value is entered, there is no limit. The function of time1 and time2 is the same as that of select .. where finish_time between time1 and time2.
- Data on the standby node is not stored in the table, and the index of the start_time column does not exist. You are advised to use parameters to search for finish_time. The performance is optimized internally. However, if the system time is changed, this function may be inaccurate.
- The query results are automatically sorted in descending order (from new to old) based on finish_time.
- In addition to the calculation process of the FunctionScan operator, data scanning occupies 16 MB or 32 MB memory as a temporary buffer.
- The stability level of this function is 'v'.
- Full SQL statements on the standby node are written to disks asynchronously. Therefore, the storage of user SQL information may be delayed. You are advised to query this API to expand the query time range.